Made in the USA, the Mavic 3 PRCS Elite system charges up to four batteries and two USB mobile devices simultaneously. The M3 PRCS Elite will charge four flight batteries from 20-90% in 45 minutes and up to 98%+ in 60 minutes. The charging system is designed to be powered by diverse power sources ranging from pure sine wave to modified sine wave, often provided by inverters and generators. It features CDC Intelligent Charging, which includes current, voltage, and temperature management for safety and speed.

Made in the USA, the Mavic 2 PRCS Elite system charges up to four batteries and two USB mobile devices simultaneously. The M2 PRCS Elite will charge four flight batteries from 20-90% in 30 minutes and up to 98%+ in 55 minutes. The charging system is designed to be powered by diverse power sources ranging from pure sine wave to modified sine wave, often provided by inverters and generators. It features CDC Intelligent Charging which includes current, voltage, and temperature management for safety and speed.

DJI Mavic 3 Enterprise Series RTK Module is compatible with DJI Mavic 3 Enterprise Series aircraft. It provides centimeter-level precision positioning when used with the Network RTK service, Custom Network RTK service, or D-RTK 2 Mobile Station. It is recommended for use with the DJI Mavic 3E to promote high-accuray mapping and surveying. The Mavic 3T is not designed for mapping and surveying but is compatible with the M3E Series RTK Module.

Explicitly designed to power the DJI Matrice 300 Series aircraft, the TB65 Intelligent Flight Battery is a 12-cell (12S) LiPo battery with a maximum capacity of 5935 mAh and a maximum voltage of 52.8 V. With its self-heating ability, the TB65 battery can perform even in extreme cold. The TB65 battery can only be charged with a BS65 or BS60 Battery Station that has been updated to the latest firmware.

DJI Mavic 3 Enterprise Series Battery Kit includes three Intelligent Flight Batteries and one DJI Mavic 3 100W Battery Charging Hub. The 100W USB-C Power Adapter is sold separately.

PRCS stands for Portable Rapid Charging Station and the PRCS Elite for the DJI Inspire 2 TB50 and Matrice 200 Series TB50-M200 and TB55 battery is by far the best solution for rapid field charging. With its proprietary intelligent charging algorithms, the Colorado Drone Chargers PRCS Elite safely and efficiently charges up to four TB50 or TB55 batteries along with one WB37 battery using your existing WB37 Battery Charging Hub. Fully charge your four TB50s or TB55s in about 90 minutes with the CDC PRCS Elite.

When you need your entire M30/M30T mission kit, payloads, and all, the GPC case for the DJI Matrice 30 Series packs it all into one rugged case. You have room for six TB30 batteries, compartments for a top-mount attachment, such as the CZI LP12 Speaker/Spotlight, and even room for a UVT ProCare Lens Cleaning Pen, microSD card holder, and other accessories. Proudly made in the USA.

This rugged hard case from our friends at GPC features their world-renowned water jet cut custom foam to house your Matrice 200, Matrice 210, or Matrice 210 RTK alongside your XT, XT2 or Z30. The custom foam also houses enough batteries and accessories to stay in the air for a full days' worth of flying. The hard case is made by SKB and features wheels, and collapsing rubber-coated handled for easy transport. Also compatible with the full Matrice 200 Series V2 line.

The DJI Matrice 210 V1 Dual Downward Gimbal Connector allows you to physically mount two camera gimbals to the bottom of your Matrice 210 V1 or Matrice 210 RTK V1. This gimbal mount is only compatible with the Matrice 200 Series V1.

The GPC backpack for the Matrice 30 or Matrice 30T will get your mission kit to wherever you may need to launch in nearly any environment imaginable. This DJI M30 backpack holds the M30/M30T, two RC Plus controllers, and six DJI TB30 batteries for plenty of air time out in the wild.

When you need to take your Matrice 30 or Matrice 30T and dual RC Plus remotes to your mission site, this compact rugged case will take you there. The GPC case for the M30 and M30T is a balanced, portable all-in-one system. You have room for six TB30 batteries, a compartment for spare props, and even a spot for a UVT ProCare Lens Cleaning Pen, microSD card holder, and other accessories.

The Mavic 2 Enterprise Fly More Kit from DJI includes additional accessories for your Mavic 2 Enterprise drone. This kit features two self-heating flight batteries, a cable to turn them into portable power banks, two pairs of low-noise propellers, chargers, and a shoulder bag to carry it all in. With these items at your disposal, you can stay on scene and in the air longer, even in frigid temperatures as low as 14° F.

DJI X-Port is a high-precision 3-axis gimbal that enables developers to create third-party payloads that best match DJI flight platforms using DJI's pioneering gimbal technology.

This GPC M30 12 Battery Case holds up to six sets of TB30 flight batteries, four spare WB37 batteries, an additional RC Plus, and accessories providing enough power for more than four hours of flight time and ~6 hours of runtime for your RC Plus.

Explicitly designed to power the Matrice 30 Series drone, the DJI TB30 Intelligent Flight Battery is a 6-cell (6S) Ternary Lithium battery with a maximum capacity of 5880 mAh and a maximum voltage of 26.1 V. With its self-heating ability, the TB30 can perform even in extreme cold. The TB30 battery can only be charged using the DJI BS30 Intelligent Battery Station.

The M2EA RTK Module enables your Mavic 2 Enterprise Advanced to fly more accurately and precisely through a connection with an existing NTRIP network. This RTK Module is only compatible with the DJI Mavic 2 Enterprise Advanced. It will not function with the Mavic 2 Enterprise Zoom or Mavic 2 Enterprise Dual.

With DJI's Upward Gimbal Connector, you can now mount a single camera gimbal (sold separately) to the top of your matrice 200 Series Drones.

The DJI Matrice 210 V2 Single Upward Gimbal Connector allows you to mount one camera/gimbal to the top of your Matrice 210 V2. Compatible with Matrice 210 V2 & Matrice 210 RTK V2. This gimbal mount is only compatible with the Matrice 200 Series V2.

This GPC M30 10 Battery Case holds up to five sets of TB30 flight batteries and five WB37 batteries providing enough power for more than 3 hours of flight time and ~7 hours of runtime for your RC Plus without the need to charge.

The DJI Matrice 300 Dual Gimbal Connector is an upgrade to the stock gimbal connector. The Dual Gimbal Connector for the DJI M300 allows you to mount two DJI SkyPort-compatible payloads to the bottom of your Matrice 300.

This GPC M30 8 battery case holds up to four sets of TB30 flight batteries and four WB37 batteries giving you enough power for more than 2.5 hours of flight time and ~6 hours of runtime for your RC Plus without the need to charge.