The DJI Matrice 300 OSDK Expansion Module mounts to the top of the DJI M300 to allow for the mounting and connection of some available SDK accessories, such as the DJI Manifold 2. Access to DJI's Onboard SDK is required in order to fully utilize the DJI M300 OSDK Expansion Module.

The DJI Matrice 300 Upward Gimbal Connector adds the ability to mount an upward-facing payload to your DJI M300. This gimbal connector can be attached in addition to the factory single downward gimbal connector, or the available dual downward gimbal connector.

You are not able to attach this gimbal connector if you have the available CSM Radar attached.

This is the battery that powers the Mavic 3 drone from DJI. This is a 4-cell (4S) LiPo battery with a maximum capacity of 5000 mAh or 77 Wh. This battery will provide up to 46 minutes of flight time with your DJI Mavic 3.

Whether you need extra storage or you're trying to keep the weight of your M300 case down, the GPC DJI Matrice 300 Battery Case is your answer. The weather-resistant, drop-resistant hard case comes with custom cut foam to house a total of six (6) DJI M300 TB60 batteries.

The Mavic 2 Enterprise Intelligent Flight Battery is a 4-cell (4S) lithium-ion polymer (LiPo) battery with a maximum capacity of 3850 mAh. Built-in self-heating technology improves flight times and overall performance in extremely cold environments (14 °F / -10 °C).

The DJI Mavic 3 Enterprise Speaker transmits sound over long distances to make rescue and other emergency missions more efficient. The DJI M3E Speaker can save several audio recordings and supports auto loop playback.

If there's one brand that resonates with drone pilots, it's Hoodman. This Hoodman drone launch pad is their 5-foot diameter landing pad designed to keep your small drone safe during takeoff and landing. This is the recommended landing pad for drones such as the DJI Matrice 300 RTK.

The Mavic 2 Shoulder Bag is designed to carry everything you need for a full day of flying. This is the same bag that is included with the Mavic 2 Fly More Kit and Mavic 2 Enterprise Fly More Kit. It holds the Mavic 2 aircraft, a standard remote controller, up to three flight batteries, extra props, and miscellaneous cables.

This External GPS Kit for the DJI Matrice 200 Series V2 provides you with an external GPS antenna which is required when top-mounting a gimbal on the M210 V2 or M210 RTK V2. Some third-party sensors and accessories also utilize the External GPS Kit and the manufacturer of your sensor or accessory should specify when to use it. The GPS antenna is built onto a landing gear mounting bracket that can replace either the left or right-hand mounting bracket already on your aircraft.

When connected to a designated charger, the DJI Mavic 3 100W Battery Charging Hub can expand the charging interface to three. The battery charging hub enhances efficiency by charging batteries in sequence according to their remaining power level, with more fully-charged batteries receiving power first.

Protecting your Mavic 2 and accessories from the elements, has never been easier, with this Protector Hard Case for Mavic 2 Enterprise from DJI. Sturdy, rugged, and impact-resistant this case is perfect for capturing aerial images in remote locations. With an Ingress Protection rating of IP67 this case is dustproof and submersible in water to 3.3'.

The case's interior includes EVA foam inserts with custom cutouts providing precise fits for the Mavic 2 and its host of accessories, including the optional Mavic 2 Fly More Kit. Securely close via two external latches and add optional padlocks (not included) for theft prevention, with the designed padlock cutouts.

The Mavic 2 Enterprise Speaker from DJI allows you to easily direct and amplify audio as needed. Designed to provide nimble communication in a variety of scenarios the 10W speaker is capable of playing sound at up to 100 dB. Ambient noise will have a direct impact on distance performance but communication distances generally vary from 66' to 131'.

The DJI 100W USB-C Power Adapter is used to charge the DJI Mavic 3 Enterprise Series Battery, DJI RC Pro Enterprise remote controller, DJI Avata Battery Charging Hub, or mobile devices with a USB-C port by connecting to a power outlet. Includes wall cable and USB-C cable.

These 2195 high-altitude folding low-noise propellers enable your DJI Matrice 300 RTK to safely and efficiently operate at altitudes higher than 2500 meters MSL. Sold in pairs with one clockwise (CW) and one counterclockwise (CCW) propeller.

Add additional functionality with this single Antenna Mounting Bracket for Matrice 200 from DJI and an (optional) GPS module or D-RTK antenna. When mounting a D-RTK antenna, this mount will also accommodate the folding and unfolding of the antenna. When folded, the bracket helps to keep the D-RTK antenna under the drone's body.

These 2195 high-altitude folding low-noise propellers enable your DJI Matrice 600 Series to safely and efficiently operate at altitudes higher than 2500 meters MSL. Sold in pairs with one clockwise (CW) and one counterclockwise (CCW)

The style and specifications of the DJI X-PORT carrying case are the same as that of the H20T carrying case, enabling secure storage and easy transportation of third-party payloads.

The DJI Mavic 2 Enterprise Beacon is engineered for ultimate visibility and easily mounts to the top of your Mavic 2 Enterprise. Designed to U.S. Federal Aviation Administration standards this flashing strobe is visible over 3 miles away, satisfying waiver regulations for flying during low light conditions.

This is an upgraded, drop-in replacement foam set for the factory Mavic 2 Enterprise hard case. This foam set is custom cut for the Mavic 2 Enterprise with Smart Controller and all of the accessories you need for a full day in the field.

The DJI Mavic 2 Battery Charging Hub can hold up to four Mavic 2 or Mavic 2 Enterprise flight batteries. Powered by the factory single-lead Mavic 2 Battery Charger, the Mavic 2 Battery Charging Hub charges one flight battery at-a-time and cycles through the connected batteries charging the battery with the highest power level first.

Power up your Mavic 2 battery on the go and in the car with the DJI Mavic 2 Car Charger from DJI. With a maximum power output of 80W your Mavic 2 battery will fully charge in approximately 1.5 hours.