The Matrice 300 RTK is one of DJI's flagship commercial drone platforms. Offering up to 45 minutes of usable flight time, advanced artificial intelligence capabilities, 6-direction sensing and positioning, weather resistance, and more, the M300 RTK sets a whole new standard for commercial drones by combining intelligence with high-performance and unrivaled reliability.

The Matrice 300 RTK is one of DJI's flagship commercial drone platforms. Offering up to 45 minutes of usable flight time, advanced artificial intelligence capabilities, 6-direction sensing and positioning, weather resistance, and more, the M300 RTK sets a whole new standard for commercial drones by combining intelligence with high-performance and unrivaled reliability.

Compatible with the Matrice 300 RTK drone, the Smart Controller Enterprise utilizes OcuSync Enterprise technology, providing command/control and video transmission from up to 9 miles away. It also receives and displays your M300's camera footage on a built-in 5.5" FHD (1920x1080) display. The controls provide twin sticks and buttons to operate various aircraft functions, such as RTH, flight pause, and flight mode selection. Dual wheels also offer greater control of an attached gimbal.

The BS60 Battery Charging Station from DJI is designed around the Matrice 300 TB60 flight battery and the WB37 intelligent battery that powers the M300's Smart Controller Enterprise, as well as a number of other DJI products. The BS60 will charge one set of TB60s and one WB37 simultaneously and it is capable of managing, monitoring and updating a total of eight TB60 batteries at one time.

It is not recommended to store or transport batteries in the BS60.

The Circular Scanning Millimeter-Wave (CSM) Radar enables the Matrice 300 RTK to better sense and avoid smaller obstacles that might be difficult for the vision sensor system to detect, like high-voltage power lines and tree branches. During night operations when the vision system cannot operate, the CSM radar will remain operational to enhance flight safety even in complete darkness.

This hard case for the DJI Matrice 300 by Go Professional Cases (GPC) is designed to allow you to carry everything you need for a full day's work. Unlike the factory hard case from DJI, this GPC case allows you to carry the M300 and a total of four sets of flight batteries, in addition to an H20, H20T, or H20N, your Z15 gimbal spotlight, and a Z30 or XT2. This being the Matrice 300 Case V2 adds the ability to also carry an L1 or P1 thanks to the redesigned payload tray of the V2 case. All of this in a rugged, water-resistant, drop-resistant Pelican-style hard case from SKB.

Explicitly designed to power the DJI Matrice 300 RTK, the TB60 Intelligent Flight Battery is a 12-cell (12S) LiPo battery with a maximum capacity of 5935 mAh and a maximum voltage of 52.8 V. With its self-heating ability, the TB60 can perform even in extreme cold. The TB60 battery can only be charged using the DJI BS60 Battery Charging Station.

DJI X-Port is a high-precision 3-axis gimbal that enables developers to create third-party payloads that best match DJI flight platforms using DJI's pioneering gimbal technology.

The DJI Matrice 300 Dual Gimbal Connector is an upgrade to the stock gimbal connector. The Dual Gimbal Connector for the DJI M300 allows you to mount two DJI SkyPort-compatible payloads to the bottom of your Matrice 300.

The DJI Matrice 300 OSDK Expansion Module mounts to the top of the DJI M300 to allow for the mounting and connection of some available SDK accessories, such as the DJI Manifold 2. Access to DJI's Onboard SDK is required in order to fully utilize the DJI M300 OSDK Expansion Module.

The DJI Matrice 300 Upward Gimbal Connector adds the ability to mount an upward-facing payload to your DJI M300. This gimbal connector can be attached in addition to the factory single downward gimbal connector, or the available dual downward gimbal connector.

You are not able to attach this gimbal connector if you have the available CSM Radar attached.

Whether you need extra storage or you're trying to keep the weight of your M300 case down, the GPC DJI Matrice 300 Battery Case is your answer. The weather-resistant, drop-resistant hard case comes with custom cut foam to house a total of six (6) DJI M300 TB60 batteries.

This pair of 2110 folding propellers have been designed and engineered for the DJI Matrice 300 RTK drone to provide superior flight performance. With their aerodynamic design, these M300 propellers enable a maximum flight time of 55 minutes at altitudes below 2500 meters MSL. For operations at higher altitudes, please use the available 2195 High-Altitude Folding Propellers. These 2110 M300 props are sold in pairs with one clockwise (CW) and one counterclockwise (CCW) propeller.

If there's one brand that resonates with drone pilots, it's Hoodman. This Hoodman drone launch pad is their 5-foot diameter landing pad designed to keep your small drone safe during takeoff and landing. This is the recommended landing pad for drones such as the DJI Matrice 300 RTK.

These 2195 high-altitude folding low-noise propellers enable your DJI Matrice 300 RTK to safely and efficiently operate at altitudes higher than 2500 meters MSL. Sold in pairs with one clockwise (CW) and one counterclockwise (CCW) propeller.

The style and specifications of the DJI X-PORT carrying case are the same as that of the H20T carrying case, enabling secure storage and easy transportation of third-party payloads.