DJI Care Refresh 1-Year Plan for Mini 2
49.00 49.00 49.0 USD
DJI Care Refresh for the Mini 2 is a 12-month protection plan providing you with two new or like-new replacement units at a highly discounted cost within the year. The cost for the first replacement is $49 and the charge for the second replacement is $69.
DJI Care Refresh 2-Year Plan for Mini 2
79.00 79.00 79.0 USD
DJI Care Refresh provides you with peace of mind, covering physical damage to your Mini 2. DJI's 2-Year Care Refresh Plans are valid for 24 months and offer up to three full replacements if accidental damage occurs to your airframe, gimbal, propellers, and battery during normal use. A small fee will be assessed for each replacement. This includes damage via water, user error, collision, drops, and signal interference. Each time you request a replacement, you'll receive a drone that is new or equivalent-to-new in performance and reliability. DJI's 2-Year Care Refresh Plan also extends the factory warranty up to two years from the date of purchase.
DJI Care Refresh for Mavic Air 2
79.00 79.00 79.0 USD
DJI Care Refresh for the Mavic Air 2 is a 12-month protection plan providing you with two replacement units for a small charge at the time of each replacement. The charge for the first replacement is $69, and the charge for the second replacement is $99.
DJI Care Refresh+ for Mavic Air 2
59.00 59.00 59.0 USD
DJI Care Refresh+ for the Mavic Air 2 extends your existing DJI Care Refresh protection plan for 12-months and provides you one additional replacement unit for a small fee during that period. The replacement fee while under Care Refresh+ is $59.
DJI Inspire 2 X5S Standard Kit
5,299.00 5,299.00 5299.0 USD
With the Inspire 2 Standard Kit with Zenmuse X5S camera & MFT 15mm/1.7 ASPH Lens from DJI, you get a complete aerial imaging solution right out of the box. Included with the Inspire 2 is the Zenmuse X5S gimbal camera with a 15mm Micro Four Thirds lens. This provides you with the capability of capturing footage at up to 5.2K resolution at 30 fps in CinemaDNG and Apple ProRes. It is also capable of recording up to 4K video at a smooth 60 fps. Images can be captured at up to 21 MP, even in 20 fps DNG burst shooting mode, which helps ensure you always get the perfect shot. As you fly the magnesium-aluminum-clad Inspire 2, all the recording functionality is processed by its CineCore 2.0 image-processing engine.
DJI Manifold 2-C
1,580.00 1,580.00 1580.0 USD
The Manifold 2-C from DJI is a powerful onboard computer that transforms drones into autonomous robots that turn your vision into reality. The DJI Manifold 2-C uses an Intel Core i7-8550U processor and is ideal for robotics applications, real-time data analysis, and connection to a ground station. The Manifold 2-C is expandable and easily integrated with DJI's leading enterprise platforms, making it the go-to onboard computer for any user who wants to build customized autonomous drone solutions.
DJI Manifold 2-G
1,280.00 1,280.00 1280.0 USD
The Manifold 2-G from DJI is a powerful onboard computer that transforms drones into autonomous robots that turn your vision into reality. The DJI Manifold 2-G uses the NVIDIA Jetson TX2 processor and is ideal for AI applications, image processing, motion analysis, and object recognition thanks to the TX2's 256-core NVIDIA Pascal™ GPU architecture. The Manifold 2-G is expandable and easily integrated with DJI's leading enterprise platforms, making it the go-to onboard computer for any user who wants to build customized autonomous drone solutions.
DJI Matrice 200 1760S Quick-Release Propellers
25.00 25.00 25.0 USD
DJI Matrice 200 1760S Quick-Release Propellers have been designed by DJI to enable efficient, safe, and reliable flight with the DJI Matrice 200 Series drones. These propellers are very easy to install and remove thanks to their quick-release design and color-coding to indicate the proper rotation for each motor. These Matrice 200 Series props are sold in pairs, each coming with one clockwise and one counterclockwise propeller.
DJI Matrice 200 TB55 Intelligent Flight Battery
475.00 475.00 475.0 USD
The TB55 Intelligent Flight Battery is a 6-cell (6S) LiPo battery with a maximum capacity of 7660 mAh and a maximum voltage of 26.4 V. With its self-heating ability, the TB55 can perform even in extreme cold.
DJI Matrice 300 2110 Folding Propeller
120.00 120.00 120.0 USD
This pair of 2110 folding propellers have been designed and engineered for the DJI Matrice 300 RTK drone to provide superior flight performance. With their aerodynamic design, these M300 propellers enable a maximum flight time of 55 minutes at altitudes below 2500 meters MSL. For operations at higher altitudes, please use the available 2195 High-Altitude Folding Propellers. These 2110 M300 props are sold in pairs with one clockwise (CW) and one counterclockwise (CCW) propeller.
DJI Matrice 300 2195 High-Altitude Low-Noise Propeller
95.00 95.00 95.0 USD
These 2195 high-altitude folding low-noise propellers enable your DJI Matrice 300 RTK to safely and efficiently operate at altitudes higher than 2500 meters MSL. Sold in pairs with one clockwise (CW) and one counterclockwise (CCW).
DJI Matrice 300 BS60 Intelligent Battery Station
1,200.00 1,200.00 1200.0 USD
The BS60 Battery Charging Station from DJI is designed around the Matrice 300 TB60 flight battery and the WB37 intelligent battery that powers the M300's Smart Controller Enterprise, as well as a number of other DJI products. The BS60 will charge one set of TB60s and one WB37 simultaneously and it is capable of managing, monitoring and updating a total of eight TB60 batteries at one time.

It is not recommended to store or transport batteries in the BS60.
DJI Matrice 300 Dual Gimbal Connector
250.00 250.00 250.0 USD
The DJI Matrice 300 Dual Gimbal Connector is an upgrade to the stock gimbal connector. The Dual Gimbal Connector for the DJI M300 allows you to mount two compatible payloads to the bottom of your Matrice 300.

Compatible payloads include the DJI Zenmuse H20 Series, DJI Zenmuse P1, DJI Zenmuse L1, DJI Zenmuse XT2, and some third-party payloads.
DJI Matrice 300 RTK - Flexible Flat Cable for Battery Port Board to ESC Board
9.00 9.00 9.0 USD
This is a Genuine OEM replacement flexible flat cable that connects the battery port board to the ESC board on the DJI Matrice 300 RTK.
DJI Matrice 300 RTK - Flexible Flat Cable for ESC Board to Core Board
21.00 21.00 21.0 USD
This is a Genuine OEM replacement flexible flat cable that connects the ESC board to the core board.
DJI Matrice 300 RTK - Flexible Flat Cable for SDR Board to Core Board
15.00 15.00 15.0 USD
This is a Genuine OEM replacement flexible flat cable that connects the SDR board to the core board.
DJI Matrice 300 RTK - RTK Board Flexible Flat Cable
9.00 9.00 9.0 USD
This is a Genuine OEM replacement flexible flat cable for the RTK board of the DJI Matrice 300 RTK.
DJI Matrice 300 TB60 Intelligent Flight Battery
700.00 700.00 700.0 USD
Explicitly designed to power the DJI Matrice 300 RTK, the TB60 Intelligent Flight Battery is a 12-cell (12S) LiPo battery with a maximum capacity of 5935 mAh and a maximum voltage of 52.8 V. With its self-heating ability, the TB60 can perform even in extreme cold.
DJI Matrice 300 Upward Gimbal Connector
210.00 210.00 210.0 USD
The DJI Matrice 300 Upward Gimbal Connector adds the ability to mount an upward-facing payload to your DJI M300. This gimbal connector can be attached in addition to the factory single downward gimbal connector, or the available dual downward gimbal connector.

You are not able to attach this gimbal connector if you have the available CSM Radar attached.
DJI Mavic 2 - 8330F Quick-Release Folding Propeller Mounting Base CCW
9.00 9.00 9.0 USD
This is a Genuine OEM replacement counterclockwise 8330F quick-release folding propeller base for the DJI Mavic 2 Pro, Mavic 2 Zoom, and Mavic 2 Enterprise.
DJI Mavic 2 - 8330F Quick-Release Folding Propeller Mounting Base CW
9.00 9.00 9.0 USD
This is a Genuine OEM replacement clockwise 8330F quick-release folding propeller base for the DJI Mavic 2 Pro, Mavic 2 Zoom, and Mavic 2 Enterprise.