The DJI 100W USB-C Power Adapter is used to charge the DJI Mavic 3 Enterprise Series Battery, DJI RC Pro Enterprise remote controller, DJI Avata Battery Charging Hub, or mobile devices with a USB-C port by connecting to a power outlet. Includes wall cable and USB-C cable.

The Propeller Mounting Plate for Matrice 200 Series Drones from DJI is designed to connect the propeller with the motor. This is for a set of four replacement mounting plates for your aircraft. You can easily add one or more mounting plates to your equipment, which will give you the ability to make onsite repairs if needed.

DJI Matrice 200 1760S Quick-Release Propellers have been designed by DJI to enable efficient, safe, and reliable flight with the DJI Matrice 200 Series drones. Easy to install and remove thanks to their quick-release design and color-coding to indicate the proper rotation for each motor, these Matrice 200 Series props are sold in pairs, each coming with one clockwise and one counterclockwise propeller.

Add additional functionality with this single Antenna Mounting Bracket for Matrice 200 from DJI and an (optional) GPS module or D-RTK antenna. When mounting a D-RTK antenna, this mount will also accommodate the folding and unfolding of the antenna. When folded, the bracket helps to keep the D-RTK antenna under the drone's body.

PRCS stands for Portable Rapid Charging Station and the PRCS Elite for the DJI Inspire 2 TB50 and Matrice 200 Series TB50-M200 and TB55 battery is by far the best solution for rapid field charging. With its proprietary intelligent charging algorithms, the Colorado Drone Chargers PRCS Elite safely and efficiently charges up to four TB50 or TB55 batteries along with one WB37 battery using your existing WB37 Battery Charging Hub. Fully charge your four TB50s or TB55s in about 90 minutes with the CDC PRCS Elite.

This External GPS Kit for the DJI Matrice 200 Series V2 provides you with an external GPS antenna which is required when top-mounting a gimbal on the M210 V2 or M210 RTK V2. Some third-party sensors and accessories also utilize the External GPS Kit and the manufacturer of your sensor or accessory should specify when to use it. The GPS antenna is built onto a landing gear mounting bracket that can replace either the left or right-hand mounting bracket already on your aircraft.

With DJI's Upward Gimbal Connector, you can now mount a single camera gimbal (sold separately) to the top of your matrice 200 Series Drones.

The DJI Matrice 210 V1 Dual Downward Gimbal Connector allows you to physically mount two camera gimbals to the bottom of your Matrice 210 V1 or Matrice 210 RTK V1. This gimbal mount is only compatible with the Matrice 200 Series V1.

The DJI Matrice 210 V2 Single Upward Gimbal Connector allows you to mount one camera/gimbal to the top of your Matrice 210 V2. Compatible with Matrice 210 V2 & Matrice 210 RTK V2. This gimbal mount is only compatible with the Matrice 200 Series V2.

The DJI Matrice 30 is the DJI Enterprise flagship drone. Its compact and foldable design allows for quick deployment and with multiple high-performance sensors integrated into a single camera payload, the DJI M30 packs a punch while still being incredibly portable. Controlled with the included DJI RC Plus remote controller, the entire system is weather-rated and can withstand even the harshest environments while operating continuously thanks to hot-swappable battery technology.

The DJI Matrice 30 is the DJI Enterprise flagship drone. Its compact and foldable design allows for quick deployment and with multiple high-performance sensors integrated into a single camera payload, the DJI M30 packs a punch while still being incredibly portable. Controlled with the included DJI RC Plus remote controller, the entire system is weather-rated and can withstand even the harshest environments while operating continuously thanks to hot-swappable battery technology.

The 1671 propeller is designed exclusively for the DJI Matrice 30 Series aircraft to promote safe and reliable flight in nearly any environment. Sold as individual blades in pairs.

These 1676 High-Altitude Propellers for the DJI Matrice 30 Series drone enable safe and efficient flight even at altitudes up to 22,966 feet (7,000 meters).

The DJI BS30 Intelligent Battery Charging Station is designed around the Matrice 30 Series TB30 flight battery and the WB37 intelligent battery that powers the DJI RC Plus remote and many other accessories. The DJI BS30 will charge one set of TB30 flight batteries, one WB37, and one DJI RC Plus remote control simultaneously with three available charging modes to meet your mission needs.

Explicitly designed to power the Matrice 30 Series drone, the DJI TB30 Intelligent Flight Battery is a 6-cell (6S) Ternary Lithium battery with a maximum capacity of 5880 mAh and a maximum voltage of 26.1 V. With its self-heating ability, the TB30 can perform even in extreme cold. The TB30 battery can only be charged using the DJI BS30 Intelligent Battery Station.

These 2195 high-altitude folding low-noise propellers enable your DJI Matrice 300 RTK to safely and efficiently operate at altitudes higher than 2500 meters MSL. Sold in pairs with one clockwise (CW) and one counterclockwise (CCW) propeller.

The BS60 Battery Charging Station from DJI is designed around the Matrice 300 TB60 flight battery and the WB37 intelligent battery that powers the M300's Smart Controller Enterprise, as well as a number of other DJI products. The BS60 will charge one set of TB60s and one WB37 simultaneously and it is capable of managing, monitoring and updating a total of eight TB60 batteries at one time.

It is not recommended to store or transport batteries in the BS60.

The DJI Matrice 300 Dual Gimbal Connector is an upgrade to the stock gimbal connector. The Dual Gimbal Connector for the DJI M300 allows you to mount two DJI SkyPort-compatible payloads to the bottom of your Matrice 300.

The DJI Matrice 300 OSDK Expansion Module mounts to the top of the DJI M300 to allow for the mounting and connection of some available SDK accessories, such as the DJI Manifold 2. Access to DJI's Onboard SDK is required in order to fully utilize the DJI M300 OSDK Expansion Module.

The BS65 Battery Station is a one-stop battery charging, storage, and transport solution. The new Storage Mode and Ready-to-Fly Mode improve charging efficiency and extend the battery life. The new 360° wheels facilitate more convenient transportation. The battery station provides eight TB65 battery ports, four WB37 battery ports, one USB-C maintenance port, one USB-C charging port, and one USB-A charging port. It can charge up to two TB65 batteries and one WB37 battery simultaneously.

The Circular Scanning Millimeter-Wave (CSM) Radar enables the Matrice 300 RTK to better sense and avoid smaller obstacles that might be difficult for the vision sensor system to detect, like high-voltage power lines and tree branches. During night operations when the vision system cannot operate, the CSM radar will remain operational to enhance flight safety even in complete darkness.