Categories
uAvionix pingRID
299.00 299.00 299.0 USD
The pingRID module is small, lightweight, and easy to attach to any drone, pingRID will keep you flying with trusted aviation-grade avionics from uAvionix. Whether you’re flying for recreation or commercial part 107, pingRID has you covered. The pingRID is Made in the USA and was developed under the FAA BAA Contract, so it does not contain any Chinese-made components, making it ideal for use with aircraft being flown for federal work.
Hot! 🔥
SwellPro SplashDrone 4 Smart Battery Charger
99.00 99.00 99.0 USD
This Smart Battery Charger for the SplashDrone 4 from SwellPro safely and intelligently charges the SplashDrone 4 Intelligent Battery.
SwellPro SplashDrone 4 Remote Controller Tablet Holder
59.00 59.00 59.0 USD
This Remote Controller Tablet Holder for the SplashDrone 4 from SwellPro enables you to mount 9-12.9" mobile devices to the SplashDrone 4 Remote Controller. Made from aluminum alloy, the SplashDrone 4 RC Tablet Holder securely locks your tablet into place.
SwellPro SplashDrone 4 PL1-S Payload Drop System
69.00 69.00 69.0 USD
The PL1-S Payload Drop System enables the SplashDrone 4 (sold separately) to carry and release various payloads to stranded swimmers, rescue victims, or anywhere you need to deliver an item. The SplashDrone 4 has a maximum payload of ~4.5 pounds and the PL1-S can be run alongside one of the available camera payloads such as the GC3-S 4K camera or GC3-T thermal camera. The weight of the camera you have installed will impact the available payload of the aircraft.
SwellPro SplashDrone 4 GC3-T Thermal Camera Payload
5,999.00 5,999.00 5999.0 USD
The GC3-T Thermal Camera Payload for the SplashDrone 4 (sold separately) is a high-resolution 640x512 thermal camera and 1080p low-light visual camera in one single unit enabling the world's leading waterproof drone to see detailed thermal and visual imagery even in complete darkness. The GC3-T high-resolution thermal drone camera can be run alongside the available PL1-S Payload Drop System.
SwellPro SplashDrone 4 GC3-S 4K Camera Payload
699.00 699.00 699.0 USD
The GC3-S 4K Camera from SwellPro is built specifically for the SplashDrone 4 (sold separately) to enable the highest-resolution visual imagery possible on the world's leading waterproof drone. The GC3-S can be run alongside the available PL1-S Payload Drop System.
SwellPro SplashDrone 4 GC2-S Night-Vision Camera Payload
699.00 699.00 699.0 USD
The GC2-S Night-Vision Camera from SwellPro is built specifically for the SplashDrone 4 (sold separately) to enable nighttime operations through its 2-axis stabilized night-vision camera and spotlight all in one single unit. The GC2-S can be run alongside the available PL1-S Payload Drop System.
SwellPro SplashDrone 4 Base Kit
1,799.00 1,799.00 1799.0 USD
The SplashDrone 4 from SwellPro is a multi-functional waterproof flight and float platform designed to safely operate near or on water as well as in the air. The SplashDrone 4 is IP67 rated, flies for 30 minutes, its capable of lifting up to 4.5 pounds and can transmit live video at a distance of 3+ miles. This is the Base Kit, with no payload included. Available payloads include a 4K camera as well as a high-resolution thermal camera w/low-light camera. All camera payloads can be run alongside the PL1-S Payload Drop System.
SwellPro 1242 Quick-Release Propellers
35.00 35.00 35.0 USD
These 1242 Carbon Fiber Quick-Release Propellers are engineered to enable the safest, most efficient flight possible even in the harshest environments with your SplashDrone 4, SplashDrone 3/3+ and Fisherman FD1 drone. Sold in pairs.
STROBON Cree® LED Standalone Collision Avoidance Beacon (White)
19.00 19.00 19.0 USD
The STROBON Collision Avoidance Beacon is a self-contained anti-collision LED strobe light with a built-in, USB-rechargeable battery that meets the FAA requirements for night operations. This STROBON comes with a white LED.
STROBON Cree® LED Standalone Collision Avoidance Beacon (Red)
19.00 19.00 19.0 USD
The STROBON Collision Avoidance Beacon is a self-contained anti-collision LED strobe light with a built-in, USB-rechargeable battery that meets the FAA requirements for night operations. This STROBON comes with a red LED.
STROBON Cree® LED Standalone Collision Avoidance Beacon (Green)
19.00 19.00 19.0 USD
The STROBON Collision Avoidance Beacon is a self-contained anti-collision LED strobe light with a built-in, USB-rechargeable battery that meets the FAA requirements for night operations. This STROBON comes with a green LED.
STROBON Cree® LED Standalone Collision Avoidance Beacon (Blue)
19.00 19.00 19.0 USD
The STROBON Collision Avoidance Beacon is a self-contained anti-collision LED strobe light with a built-in, USB-rechargeable battery that meets the FAA requirements for night operations. This STROBON comes with a blue LED.
Ryze Tech Tello Snap-On Top Cover (Yellow)
9.00 9.00 9.0 USD
Change the look and feel of your Ryze Tech Tello with this Yellow Snap-On Top Cover. Available in an assortment of colors these yellow decorative covers help differentiate your drones at a glance while providing a clean aesthetic look.
Ryze Tech Tello Snap-On Top Cover (White)
9.00 9.00 9.0 USD
Change the look and feel of your Ryze Tech Tello with this White Snap-On Top Cover. Available in an assortment of colors these white decorative covers help differentiate your drones at a glance while providing a clean aesthetic look.
Ryze Tech Tello Snap-On Top Cover (Blue)
9.00 9.00 9.0 USD
Change the look and feel of your Ryze Tech Tello with this Blue Snap-On Top Cover. Available in an assortment of colors these blue decorative covers help differentiate your drones at a glance while providing a clean aesthetic look.
Ryze Tech Tello Quick-Release Propellers
4.00 4.00 4.0 USD
Ryze Tech Tello Quick-Release Propellers have been designed by DJI to enable efficient, safe, and reliable flight with your DJI Ryze Tech Tello drone. Easy to install and remove thanks to their quick-release design and color-coding to indicate the proper rotation for each motor, these Ryze Tech Tello props are sold in pairs, each coming with one clockwise and one counterclockwise propeller.
Ryze Tech Tello Propeller Guard
5.00 5.00 5.0 USD
Provide added protection while in flight for your Ryze Tech Tello with these Propeller Guards from DJI. The propeller guards quickly attach to your Ryze Tech Tello drone with a simple and secure locking mechanism. Once in place, they are engineered to come into contact with unintended objects first, helping to prevent property damage or injury in case of an accident. The lightweight Propeller Guard for the DJI Ryze Tech Tello fully protects the propellers and improves overall flight safety when flying indoors or in other confined spaces.
Ryze Tech Tello Flight Battery
20.00 20.00 20.0 USD
The Ryze Tech Tello Flight Battery is a 4-cell (4S) lithium-ion polymer (LiPo) battery with a maximum capacity of 1110mAh. Operating temperatures are 5℃ to 45℃.
Ryze Tech Tello EDU
129.00 129.00 129.0 USD
Tello EDU is an impressive and programmable drone perfect for education. You can easily learn programming languages such as Scratch, Python, and Swift. With an upgraded SDK 2.0, Tello EDU comes with more advanced commands and increased data interfaces. Complete with DJI’s flight control technology, Tello EDU also supports Electronic Image Stabilization. Write code to command multiple Tello EDUs to fly in a swarm, and develop amazing AI functions. Programming has never been this fun thanks to the Tello EDU!
Ryze Tech Tello Boost Combo
149.00 149.00 149.0 USD
The Ryze Tech Tello Quadcopter Boost Combo lets you carry out longer programmed flights, or just buzz around for longer, as it comes packaged with three batteries, instead of one, and a 3-battery charging hub. Each battery will power up to 13 minutes of flight on a full charge. The Tello drone's tiny form factor and smart Intel processor enable it to perform exciting aerial tricks on a whim, all through smartphone control. Download the free Tello app and get going, with intuitive controls for entertaining flying maneuvers and the ability to code your flight plans using Scratch.