The DJI Mavic Mini Two-Way Charging Hub intelligently charges up to three Mavic Mini batteries in sequence. The Intelligent Flight Battery with the highest power level will be fully charged first. Other batteries will be charged in the same manner, according to their power levels. Charge three MB2-2400mAh-7.2V packs in 4.5 hours to charge all three packs. Charging three MB3-1100mAh-7.6V batteries, all three will charge in up to 2.5 hours.

The Propeller Mounting Plate for Matrice 200 Series Drones from DJI is designed to connect the propeller with the motor. This is for a set of four replacement mounting plates for your aircraft. You can easily add one or more mounting plates to your equipment, which will give you the ability to make onsite repairs if needed.

The DJI Matrice 210 V1 Dual Downward Gimbal Connector allows you to physically mount two camera gimbals to the bottom of your Matrice 210 V1 or Matrice 210 RTK V1. This gimbal mount is only compatible with the Matrice 200 Series V1.

With DJI's Upward Gimbal Connector, you can now mount a single camera gimbal (sold separately) to the top of your matrice 200 Series Drones.

The Zenmuse X5 from DJI was the world's first Micro Four Thirds drone camera. This is the Zenmuse X5 Body Only, meaning it does not come with a lens, allowing you to choose any existing Micro Four Thirds lens, or purchase one separately that's perfect for your mission. The Zenmuse X5 is only compatible with the DJI Inspire 1 V2 or Matrice 600 Pro (gimbal mounting bracket is required).

Designed to stabilize your camera on the gimbal, this Balancing Ring from DJI is compatible with the Zenmuse X5S Gimbal and Camera and the
Panasonic 15mm f/1.7 ASPH Prime Lens.

Designed to stabilize your camera on the gimbal, this Balancing Ring from DJI is compatible with the Zenmuse X5S Gimbal and Camera and the
Panasonic 14-42mm f/3.5-5.6 ASPH Zoom Lens.

Designed to stabilize your camera on the gimbal, this Balancing Ring from DJI is compatible with the Zenmuse X5S Gimbal and Camera and the
Olympus 9-18mm f/4.0-5.6 ASPH Zoom Lens.

Designed to stabilize your camera on the gimbal, this Balancing Ring from DJI is compatible with the Zenmuse X5S Gimbal and Camera,
Olympus 12mm f/2.0, Olympus 17mm f/1.8 & Olympus 25mm f/1.8 ASPH Prime Lenses.

You can adjust the amount of light that reaches your camera lens with this Zenmuse X7 DL/DL-S Lens ND4Filter from DJI. Designed to capture the images you need in most light conditions, this neutral density filter from DJI includes an ND4 filter allowing 1/4 of incoming light neutrally without changing the color of the light.

You can adjust the amount of light that reaches your camera lens with this Zenmuse X7 DL/DL-S Lens ND128 Filter from DJI. Designed to capture the images you need in most light conditions, this neutral density filter from DJI includes an ND128 filter allowing 1/128 of incoming light neutrally without changing the color of the light.

You can adjust the amount of light that reaches your camera lens with this Zenmuse X4S Lens ND16 Filter from DJI. Designed to capture the images you need in most light conditions, this neutral density filter from DJI includes an ND16 filter allowing 1/16 of incoming light neutrally without changing the color of the light.

Protect your Matrice 600 propellers while on the go with this Arm Sleeve by DJI. The Arm Sleeve helps shield the propellers of your Matrice 600 by securing them to the drone's motor arm.

The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 quadcopter, insert it into the CINESSD Station, then connect the station to a computer via the included USB 3.0 cable. Once connected, you'll be able to export the data from CINESSD onto your computer.

The 180W Power Adapter AC Cable from DJI is designed for use with the factory battery charger that originally came with your Inspire 2 aircraft.

The DJI Inspire 2 Focus Handwheel 2 Remote Controller Stand enables you to mount the Focus Handwheel to a remote controller. This allows a single operator to both pilot the Inspire 2 quadcopter, and more easily adjust the Zenmuse X5S camera's aperture and focus.

This cable is used to connect the Inspire 2 Battery Charging Hub to the Inspire 1 Battery Charger (compatible with 180 W and 100 W Battery Chargers) for Inspire 2 battery charging.

The Mobile Device Holder Adapter is used to connect the old version of the Inspire 2 remote controller mobile device holder to the new version of the Inspire 2 remote controller mounting bracket.

The DJI BS30 Intelligent Battery Charging Station is designed around the Matrice 30 Series TB30 flight battery and the WB37 intelligent battery that powers the DJI RC Plus remote and many other accessories. The DJI BS30 will charge one set of TB30 flight batteries, one WB37, and one DJI RC Plus remote control simultaneously with three available charging modes to meet your mission needs.

Power up your Phantom 4 Series batteries on the go and in the car with the DJI Phantom 4 Series Car Charger from DJI. The charger features low-voltage protection and overheating protection, automatically cutting off charging if your starting battery voltage is too low or the cigarette lighter port exceeds a certain temperature.

The Phantom 4 Series Propeller Mounting Plates work with any Phantom 4 Series drones. The pack includes one clockwise (CW) mounting plate and one counterclockwise (CCW) mounting plate. The plates are designed to be more durable than previous versions utilizing a patented rotor lock mechanism, using springs for better elasticity. The plates install quickly with all hardware included.