The DJI Mavic 2 Enterprise Beacon is engineered for ultimate visibility and easily mounts to the top of your Mavic 2 Enterprise. Designed to U.S. Federal Aviation Administration standards this flashing strobe is visible over 3 miles away, satisfying waiver regulations for flying during low light conditions.

The Mavic 2 Enterprise Speaker from DJI allows you to easily direct and amplify audio as needed. Designed to provide nimble communication in a variety of scenarios the 10W speaker is capable of playing sound at up to 100 dB. Ambient noise will have a direct impact on distance performance but communication distances generally vary from 66' to 131'.

The DJI Mavic 2 Battery Charging Hub can hold up to four Mavic 2 or Mavic 2 Enterprise flight batteries. Powered by the factory single-lead Mavic 2 Battery Charger, the Mavic 2 Battery Charging Hub charges one flight battery at-a-time and cycles through the connected batteries charging the battery with the highest power level first.

Power up your Mavic 2 battery on the go and in the car with the DJI Mavic 2 Car Charger from DJI. With a maximum power output of 80W your Mavic 2 battery will fully charge in approximately 1.5 hours.

Take on the go power wherever you are with the DJI Mavic 2 Battery to Power Bank Adapter. Transform your Mavic 2 battery into a charging hub with 2x USB Type A-Ports (10W per/port), allowing you to power mobile devices, tablets, and other devices.

The Mavic 2 Shoulder Bag is designed to carry everything you need for a full day of flying. This is the same bag that is included with the Mavic 2 Fly More Kit and Mavic 2 Enterprise Fly More Kit. It holds the Mavic 2 aircraft, a standard remote controller, up to three flight batteries, extra props, and miscellaneous cables.

The Propeller Mounting Plate for Matrice 200 Series Drones from DJI is designed to connect the propeller with the motor. This is for a set of four replacement mounting plates for your aircraft. You can easily add one or more mounting plates to your equipment, which will give you the ability to make onsite repairs if needed.

The DJI Matrice 210 V1 Dual Downward Gimbal Connector allows you to physically mount two camera gimbals to the bottom of your Matrice 210 V1 or Matrice 210 RTK V1. This gimbal mount is only compatible with the Matrice 200 Series V1.

With DJI's Upward Gimbal Connector, you can now mount a single camera gimbal (sold separately) to the top of your matrice 200 Series Drones.

Protect your Matrice 600 propellers while on the go with this Arm Sleeve by DJI. The Arm Sleeve helps shield the propellers of your Matrice 600 by securing them to the drone's motor arm.

The DJI BS30 Intelligent Battery Charging Station is designed around the Matrice 30 Series TB30 flight battery and the WB37 intelligent battery that powers the DJI RC Plus remote and many other accessories. The DJI BS30 will charge one set of TB30 flight batteries, one WB37, and one DJI RC Plus remote control simultaneously with three available charging modes to meet your mission needs.

The M2EA RTK Module enables your Mavic 2 Enterprise Advanced to fly more accurately and precisely through a connection with an existing NTRIP network. This RTK Module is only compatible with the DJI Mavic 2 Enterprise Advanced. It will not function with the Mavic 2 Enterprise Zoom or Mavic 2 Enterprise Dual.

Explicitly designed to power the DJI Matrice 300 Series aircraft, the TB65 Intelligent Flight Battery is a 12-cell (12S) LiPo battery with a maximum capacity of 5935 mAh and a maximum voltage of 52.8 V. With its self-heating ability, the TB65 battery can perform even in extreme cold. The TB65 battery can only be charged with a BS65 or BS60 Battery Station that has been updated to the latest firmware.

The BS65 Battery Station is a one-stop battery charging, storage, and transport solution. The new Storage Mode and Ready-to-Fly Mode improve charging efficiency and extend the battery life. The new 360° wheels facilitate more convenient transportation. The battery station provides eight TB65 battery ports, four WB37 battery ports, one USB-C maintenance port, one USB-C charging port, and one USB-A charging port. It can charge up to two TB65 batteries and one WB37 battery simultaneously.

Designed specifically for the Matrice 3D and Matrice 3TD dockable drones, the Matrice 3D Series Intelligent Flight Battery promoted efficient and safe fast charging. With built-in heatsinks and ventilation channels, the Matrice 3D battery is kept cool in use and while rapidly charging inside the DJI Dock 2.

In The Box:
1x Matrice 3D/Matrice 3TD Intelligent Flight Battery

The DJI Matrice 4E is a compact and intelligent multi-sensor drone designed for enterprise applications. It features a 4/3-inch CMOS 20MP wide-angle camera, a 1/1.3-inch CMOS 48MP medium telephoto camera, a 1/1.5-inch CMOS 48MP telephoto camera, and a laser rangefinding module, providing powerful imaging capabilities.

The Matrice 4E excels in low-light environments with its 0.5 lux sensitivity, ensuring clear vision and stable images even in challenging conditions. Its 112x hybrid zoom allows for detailed inspections from a safe distance. Additionally, the drone offers high-efficiency precision mapping with rapid 0.5-second interval shooting and speeds up to 21 meters per second.

Enhanced flight safety features and portability make the Matrice 4E a versatile tool for various industrial applications.

In the Box:
* 1x DJI Matrice 4E
* 1x DJI Matrice 4 Series Battery
* 1x DJI RC Plus 2 Enterprise
* 1x DJI 100W USB-C Power Adapter
* 1x DJI Matrice 4 Series Charging Hub
* 1x microSD Card
* 1x DJI Matrice 4E Gimbal Protector
* 1x DJI Cellular Dongle 2 Pry Bar
* 3x DJI Matrice 4 Series Propellers
* 1x 100W Power Adapter AC Cable
* 1x USB-C to USB-C Data Cable
* 1x USB-A to USB-C Data Cable
* 1x DJI Matrice 4 Series Storage Case
* 1x DJI Matrice 4 Series Storage Case Shoulder Strap