The EVO II 8K Gimbal Drone Camera from Autel Robotics features a Sony IMX586 sensor that can capture video footage at a stunning 8K resolution with your EVO II drone. Still photos can achieve an even higher resolution, with support for resolutions up to 8000x6000. Drones are known for their ability to get into tight areas for previously unachievable close-up shots, but when you can't make it with the EVO II, this 8K gimbal can utilize 1-8x zoom (up to 4x lossless) to get the shot you need.

This is the OTG (On-The-Go) Micro-USB to Lightning ConnecThor video feed cable from Thor's Drone World.

This is the OTG (On-The-Go) Micro-USB to USB Type-C ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Mini, Mavic Air, Mavic Pro, or Mavic 2 remote controller to a mobile device that uses a USB-C connection.

This is the USB-C to USB-C ConnecThor video feed cable from Thor's Drone World. This coiled cable is perfect for connecting your DJI Mavic Air 2 or Mini 2 remote to a USB Type-C mobile device.

This is a factory replacement of the included battery charger that came with your Mavic Air 2 from DJI. This battery charger only has a single charge lead which can be connected directly to your Mavic Air 2 battery to charge it, or it can be used to power the Mavic Air 2 Battery Charging Hub. This battery charger for the Mavic Air 2 drone also has a USB-A port allowing you to charge most common USB accessories. This battery charger does not come with the required wall cable, which must be purchased separately.

This is the USB Type-C to Lightning ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Air 2 or Mini 2 remote controller to a mobile device that uses Apple's Lightning connector.

This is the battery that powers the Mavic Air 2 and Air 2S drones from DJI. This is a 4-cell (4S) LiPo battery with a maximum capacity of 3500 mAh or 40.42 Wh. This battery will provide up to 34 minutes of flight time with your DJI Mavic Air 2 and up to 31 minutes of flight time with your DJI Air 2S.

This pair of low-noise, quick-release propellers are direct factory replacements of the propellers that come with the DJI Mavic Air 2 drone. These Mavic Air 2 props are sold in pairs, each coming with one clockwise (CW) and one counterclockwise (CCW) propeller.

DJI Care Refresh for the Mavic Air 2 is a 12-month protection plan providing you with two replacement units for a small charge at the time of each replacement. The charge for the first replacement is $69, and the charge for the second replacement is $99.

DJI Care Refresh+ for the Mavic Air 2 extends your existing DJI Care Refresh protection plan for 12-months and provides you one additional replacement unit for a small fee during that period. The replacement fee while under Care Refresh+ is $59.

This is an upgraded, drop-in replacement foam set for the factory Mavic 2 Enterprise hard case. This foam set is custom cut the standard Mavic 2 remote controller and all of the accessories you need for a full day in the field.

This External GPS Kit for the DJI Matrice 200 Series V2 provides you with an external GPS antenna which is required when top-mounting a gimbal on the M210 V2 or M210 RTK V2. Some third-party sensors and accessories also utilize the External GPS Kit and the manufacturer of your sensor or accessory should specify when to use it. The GPS antenna is built onto a landing gear mounting bracket that can replace either the left or right-hand mounting bracket already on your aircraft.

The DJI Matrice 210 V2 Single Upward Gimbal Connector allows you to mount one camera/gimbal to the top of your Matrice 210 V2. Compatible with Matrice 210 V2 & Matrice 210 RTK V2. This gimbal mount is only compatible with the Matrice 200 Series V2.

The DJI Cendence S Remote Controller for Matrice 200 Series V2 integrates OcuSync 2.0 technology to achieve transmission distances of up to 5 miles. Utilizing dual-frequency support helps ensure the video is stable across those distances. Pilot compatible drones alone or use an additional (not included) Cendence S for a dual-controller setup.

Protecting your Mavic 2 and accessories from the elements, has never been easier, with this Protector Hard Case for Mavic 2 Enterprise from DJI. Sturdy, rugged, and impact-resistant this case is perfect for capturing aerial images in remote locations. With an Ingress Protection rating of IP67 this case is dustproof and submersible in water to 3.3'.

The case's interior includes EVA foam inserts with custom cutouts providing precise fits for the Mavic 2 and its host of accessories, including the optional Mavic 2 Fly More Kit. Securely close via two external latches and add optional padlocks (not included) for theft prevention, with the designed padlock cutouts.

The Mavic 2 Zoom from DJI is a professional quality drone that gives you the ability to get closer to your subject, thanks to its 2x 24-48mm optical zoom camera with a 1/2.3" 12 MP sensor. With 4x lossless zoom (including 2x optical zoom) you can capture sensitive subjects from an even greater distance, or capture the scene in greater detail when there's no need to be covert. The Mavic 2 Zoom is one of the go-to solutions for law enforcement and other public safety missions thanks to its optical zoom capabilities, allowing the operator to get a closer look at a person or subject of interest, without having to compromise the drone's position.

Take on the go power wherever you are with the DJI Mavic 2 Battery to Power Bank Adapter. Transform your Mavic 2 battery into a charging hub with 2x USB Type A-Ports (10W per/port), allowing you to power mobile devices, tablets, and other devices.

You can adjust the amount of light that reaches your camera lens with this set of Mavic 2 Zoom ND filters. Designed to capture the images you need in most light conditions, this pack of neutral density filters from DJI includes ND4, ND8, ND16, and ND32 filters allowing 1/4, 1/8, 1/16, and 1/32 of incoming light neutrally without changing the color of the light.

Turn your Mavic Mini into an aesthetic display while charging with this Mavic Mini charging base from DJI. An illuminated halo outlines the charging base, transforming the included transparent cover into an art case for your Mavic Mini drone.

The DJI Matrice 210 V1 Dual Downward Gimbal Connector allows you to physically mount two camera gimbals to the bottom of your Matrice 210 V1 or Matrice 210 RTK V1. This gimbal mount is only compatible with the Matrice 200 Series V1.

With DJI's Upward Gimbal Connector, you can now mount a single camera gimbal (sold separately) to the top of your matrice 200 Series Drones.