This is the OTG (On-The-Go) Micro-USB to Lightning ConnecThor video feed cable from Thor's Drone World.

This is the OTG (On-The-Go) Micro-USB to USB Type-C ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Mini, Mavic Air, Mavic Pro, or Mavic 2 remote controller to a mobile device that uses a USB-C connection.

This is the USB-C to USB-C ConnecThor video feed cable from Thor's Drone World. This coiled cable is perfect for connecting your DJI Mavic Air 2 or Mini 2 remote to a USB Type-C mobile device.

This is a factory replacement of the included battery charger that came with your Mavic Air 2 from DJI. This battery charger only has a single charge lead which can be connected directly to your Mavic Air 2 battery to charge it, or it can be used to power the Mavic Air 2 Battery Charging Hub. This battery charger for the Mavic Air 2 drone also has a USB-A port allowing you to charge most common USB accessories. This battery charger does not come with the required wall cable, which must be purchased separately.

This is the USB Type-C to Lightning ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Air 2 or Mini 2 remote controller to a mobile device that uses Apple's Lightning connector.

This is the battery that powers the Mavic Air 2 and Air 2S drones from DJI. This is a 4-cell (4S) LiPo battery with a maximum capacity of 3500 mAh or 40.42 Wh. This battery will provide up to 34 minutes of flight time with your DJI Mavic Air 2 and up to 31 minutes of flight time with your DJI Air 2S.

This pair of low-noise, quick-release propellers are direct factory replacements of the propellers that come with the DJI Mavic Air 2 drone. These Mavic Air 2 props are sold in pairs, each coming with one clockwise (CW) and one counterclockwise (CCW) propeller.

DJI Care Refresh for the Mavic Air 2 is a 12-month protection plan providing you with two replacement units for a small charge at the time of each replacement. The charge for the first replacement is $69, and the charge for the second replacement is $99.

DJI Care Refresh+ for the Mavic Air 2 extends your existing DJI Care Refresh protection plan for 12-months and provides you one additional replacement unit for a small fee during that period. The replacement fee while under Care Refresh+ is $59.

Filmmakers get more control over what they capture with Mavic 3 Pro Drone with DJI RC from DJI. This flagship drone adds a third lens to the system, with a 70mm f/2.8 medium telephoto, enhancing your creative possibilities with more control of how much you capture of a subject and their surroundings. Remaining is the impressive 24mm Hasselblad wide-angle lens, with 5.1K resolution, and the 166mm telephoto, upgraded to f/3.4 and 60 fps for more light sensitivity and smoother video. This tri-camera system joins other Mavic 3 technologies, such as O3+ long-range transmission, up to 43 minutes of flight, and omnidirectional sensing with APAS 5.0 to make the Mavic 3 Pro safe for even beginner pilots.

Filmmakers get more control over what they capture with Mavic 3 Pro Fly More Combo with DJI RC from DJI. This flagship drone adds a third lens to the system, with a 70mm f/2.8 medium telephoto, enhancing your creative possibilities with more control of how much you capture of a subject and their surroundings. Remaining is the impressive 24mm Hasselblad wide-angle lens, with 5.1K resolution, and the 166mm telephoto, upgraded to f/3.4 and 60 fps for more light sensitivity and smoother video. This tri-camera system joins other Mavic 3 technologies, such as O3+ long-range transmission, up to 43 minutes of flight, and omnidirectional sensing with APAS 5.0 to make the Mavic 3 Pro safe for even beginner pilots.

DJI Matrice 200 1760S Quick-Release Propellers have been designed by DJI to enable efficient, safe, and reliable flight with the DJI Matrice 200 Series drones. Easy to install and remove thanks to their quick-release design and color-coding to indicate the proper rotation for each motor, these Matrice 200 Series props are sold in pairs, each coming with one clockwise and one counterclockwise propeller.

Filmmakers get more control over what they capture with Mavic 3 Pro Fly More Combo with DJI RC Pro from DJI. This flagship drone adds a third lens to the system, with a 70mm f/2.8 medium telephoto, enhancing your creative possibilities with more control of how much you capture of a subject and their surroundings. Remaining is the impressive 24mm Hasselblad wide-angle lens, with 5.1K resolution, and the 166mm telephoto, upgraded to f/3.4 and 60 fps for more light sensitivity and smoother video. This tri-camera system joins other Mavic 3 technologies, such as O3+ long-range transmission, up to 43 minutes of flight, and omnidirectional sensing with APAS 5.0 to make the Mavic 3 Pro safe for even beginner pilots.

PRCS stands for Portable Rapid Charging Station and the PRCS Elite for the DJI Inspire 2 TB50 and Matrice 200 Series TB50-M200 and TB55 battery is by far the best solution for rapid field charging. With its proprietary intelligent charging algorithms, the Colorado Drone Chargers PRCS Elite safely and efficiently charges up to four TB50 or TB55 batteries along with one WB37 battery using your existing WB37 Battery Charging Hub. Fully charge your four TB50s or TB55s in about 90 minutes with the CDC PRCS Elite.

Filmmakers get more control over what they capture with Mavic 3 Pro Cine Drone with DJI RC Pro from DJI. This flagship drone adds a third lens to the system, with a 70mm f/2.8 medium telephoto, enhancing your creative possibilities with more control of how much you capture of a subject and their surroundings. Remaining is the impressive 24mm Hasselblad wide-angle lens, with 5.1K resolution, and the 166mm telephoto, upgraded to f/3.4 and 60 fps for more light sensitivity and smoother video. This tri-camera system joins other Mavic 3 technologies, such as O3+ long-range transmission, up to 43 minutes of flight, and omnidirectional sensing with APAS 5.0 to make the Mavic 3 Pro safe for even beginner pilots.

A leap forward in professional-quality aerial imaging, the Mavic 3 from DJI is their flagship drone that offers a dual-camera setup in a 3-axis gimbal. There's the 20MP wide-angle camera with 4/3" CMOS from legendary camera maker Hasselblad and a 12MP telephoto with 1/2" CMOS, 4K video, and 28x hybrid zoom. You can utilize the telephoto in Explore Mode to scout locations, but its primary function is to be used in conjunction with the wide-angle Hasselblad, transitioning between the two for truly dynamic, cinematic results.

Compatible with the Matrice 300 RTK drone, the Smart Controller Enterprise utilizes OcuSync Enterprise technology, providing command/control and video transmission from up to 9 miles away. It also receives and displays your M300's camera footage on a built-in 5.5" FHD (1920x1080) display. The controls provide twin sticks and buttons to operate various aircraft functions, such as RTH, flight pause, and flight mode selection. Dual wheels also offer greater control of an attached gimbal.

This pair of 2110 folding propellers have been designed and engineered for the DJI Matrice 300 RTK drone to provide superior flight performance. With their aerodynamic design, these M300 propellers enable a maximum flight time of 55 minutes at altitudes below 2500 meters MSL. For operations at higher altitudes, please use the available 2195 High-Altitude Folding Propellers. These 2110 M300 props are sold in pairs with one clockwise (CW) and one counterclockwise (CCW) propeller.

Professional quality aerial imaging and video is now more affordable with the DJI Mavic 3 Classic with RC-N1 Remote. Nearly identical to the standard Mavic 3, the Classic version focuses on the advanced 20MP 4/3" CMOS sensor designed by legendary camera maker Hasselblad. Designed specifically for the Mavic 3 and meeting Hasselblad's rigorous hardware and software standards, the 3-axis gimbal camera is capable of 4K video at 60 fps, a maximum of 5.1K at 50 fps, and 4K slow-motion footage at 120 fps.

The DJI Smart Controller Enterprise Monitor Mounting Kit allows you to mount a mobile device or tablet to your Smart Controller Enterprise, providing you with increased capabilities while piloting your M300 RTK. The Smart Controller Enterprise Monitor Mounting Kit includes a mobile device holder for tablets and other devices.

The DJI Matrice 300 Dual Gimbal Connector is an upgrade to the stock gimbal connector. The Dual Gimbal Connector for the DJI M300 allows you to mount two DJI SkyPort-compatible payloads to the bottom of your Matrice 300.