The Autel EVO II Drone features an 8K Camera, making it the world's first folding 8K drone. Packed with a 1/2-inch CMOS sensor this aerial system is capable of taking 48MP stills (8000x6000 in resolution). Video on this aircraft tops out at 7720x4320 pixels.

The EVO II 8K Gimbal Drone Camera from Autel Robotics features a Sony IMX586 sensor that can capture video footage at a stunning 8K resolution with your EVO II drone. Still photos can achieve an even higher resolution, with support for resolutions up to 8000x6000. Drones are known for their ability to get into tight areas for previously unachievable close-up shots, but when you can't make it with the EVO II, this 8K gimbal can utilize 1-8x zoom (up to 4x lossless) to get the shot you need.

The Autel EVO II Drone features an 8K Camera, making it the world's first folding 8K drone. Packed with a 1/2-inch CMOS sensor this aerial system is capable of taking 48MP stills (8000x6000 in resolution). Video on this aircraft tops out at 7720x4320 pixels. This Rugged Bundle comes in a ruggedized hard case with Go Professional Cases (GPC) custom cut foam as well as an additional battery, extra props, a microSD card holder, and more.

This EVO II battery is a 3-cell (3S) LiPo battery with a maximum capacity of 7100 mAh and a maximum voltage of 13.2 V.

The Autel EVO II Battery Charging Hub allows you to charge up to four batteries off of a single charger. While charging, the battery hub monitors the electric current in real-time to charge up to two batteries simultaneously. On the top of the hub is an illuminated Autel logo which indicates the charging status and if any charging errors have occurred. The battery charging hub requires the power supply that came with your EVO II originally or one that you have purchased separately.

These are the all-new low-noise propellers for the Autel EVO II Series. This new low-noise design reduces noise and promotes safe, efficient flight. The EVO II drone must be flown with matching propeller types. Never mix-and-match the original version and low-noise version. These EVO 2 props ship in pairs with one clockwise (CW) and one counterclockwise (CCW) propeller.

The Autel EVO II Pro (6K) Camera is the camera that comes included with the Autel EVO II Pro. This camera can either be used as a replacement or as an upgrade if you are looking to add a high-resolution visual camera to your EVO II toolbox. This camera has a 6K 1" sensor, whereas the EVO II camera has an 8K 1/2" sensor. The EVO II features interchangeable cameras and it is very easy to change out or swap your camera payload whether you are needing to replace a camera, or if you choose to upgrade. These swaps can even be conducted in the field, making them ideal for use in public safety, utilities, construction, and other industries.

For professionals that need more control, the EVO II Pro 6K Drone from Autel Robotics offers you a gimbal camera with a variable aperture of f/2.8 to f/11, giving you wide-ranging adjustment over how much light gets into the 6K 1" sensor. The camera delivers ISO ranges up to 6400 for video and up to 12800 for photos. As for resolution, the 6K gimbal can achieve up to 5472x3076 in video and up to 5472x3648 stills. The Rugged Bundle includes a hard case with custom-cut foam from GPC, an extra flight battery, extra props, and everything else you need for a full day of missions.

Monitor your EVO's streaming video footage in real-time with the Live Deck for EVO Drones from Autel Robotics. Normally a drone's streaming camera footage is displayed in FPV goggles or on the pilot's controller display, but with the Live Deck, you can display that footage on a Windows or Mac computer, smartphone, or over your local network.

This is the OTG (On-The-Go) Micro-USB to Lightning ConnecThor video feed cable from Thor's Drone World.

This is the OTG (On-The-Go) Micro-USB to USB Type-C ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Mini, Mavic Air, Mavic Pro, or Mavic 2 remote controller to a mobile device that uses a USB-C connection.

This is the USB 2.0 to Lightning ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Pro, or Mavic 2 Series, Inspire 1, Inspire 2, or any DJI remote controller with a USB 2.0 (USB-A) connection to any mobile device that uses Apple's Lightning connector.

This is the USB 2.0 (USB-A) to USB Type-C ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Pro, or Mavic 2 Series, Inspire 1, Inspire 2, or any DJI remote controller with a USB 2.0 (USB-A) connection to any mobile device that uses a USB-C connector.

This is the USB-C to USB-C ConnecThor video feed cable from Thor's Drone World. This coiled cable is perfect for connecting your DJI Mavic Air 2 or Mini 2 remote to a USB Type-C mobile device.

This is the USB Type-C to Lightning ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Air 2 or Mini 2 remote controller to a mobile device that uses Apple's Lightning connector.

DJI Care Refresh for the Mini 2 is a 12-month protection plan providing you with two new or like-new replacement units at a highly discounted cost within the year. The cost for the first replacement is $49 and the charge for the second replacement is $69.

DJI Care Refresh provides you with peace of mind, covering physical damage to your Mini 2. DJI's 2-Year Care Refresh Plans are valid for 24 months and offer up to three full replacements if accidental damage occurs to your airframe, gimbal, propellers, and battery during normal use. A small fee will be assessed for each replacement. This includes damage via water, user error, collision, drops, and signal interference. Each time you request a replacement, you'll receive a drone that is new or equivalent-to-new in performance and reliability. DJI's 2-Year Care Refresh Plan also extends the factory warranty up to two years from the date of purchase.

DJI Care Refresh for the Mavic Air 2 is a 12-month protection plan providing you with two replacement units for a small charge at the time of each replacement. The charge for the first replacement is $69, and the charge for the second replacement is $99.

DJI Care Refresh+ for the Mavic Air 2 extends your existing DJI Care Refresh protection plan for 12-months and provides you one additional replacement unit for a small fee during that period. The replacement fee while under Care Refresh+ is $59.

With the Inspire 2 Standard Kit with Zenmuse X5S camera & MFT 15mm/1.7 ASPH Lens from DJI, you get a complete aerial imaging solution right out of the box. Included with the Inspire 2 is the Zenmuse X5S gimbal camera with a 15mm Micro Four Thirds lens. This provides you with the capability of capturing footage at up to 5.2K resolution at 30 fps in CinemaDNG and Apple ProRes. It is also capable of recording up to 4K video at a smooth 60 fps. Images can be captured at up to 21 MP, even in 20 fps DNG burst shooting mode, which helps ensure you always get the perfect shot. As you fly the magnesium-aluminum-clad Inspire 2, all the recording functionality is processed by its CineCore 2.0 image-processing engine.