The DJI Mavic 2 Battery Charging Hub can hold up to four Mavic 2 or Mavic 2 Enterprise flight batteries. Powered by the factory single-lead Mavic 2 Battery Charger, the Mavic 2 Battery Charging Hub charges one flight battery at-a-time and cycles through the connected batteries charging the battery with the highest power level first.

Power up your Mavic 2 battery on the go and in the car with the DJI Mavic 2 Car Charger from DJI. With a maximum power output of 80W your Mavic 2 battery will fully charge in approximately 1.5 hours.

Take on the go power wherever you are with the DJI Mavic 2 Battery to Power Bank Adapter. Transform your Mavic 2 battery into a charging hub with 2x USB Type A-Ports (10W per/port), allowing you to power mobile devices, tablets, and other devices.

Keep your Gimbal Camera free of dirt and debris, while not operating, with this Mavic 2 Zoom Gimbal Protector. The Gimbal Protector by DJI helps protect your camera from wear, tear, and dust build-up while not flying.

You can adjust the amount of light that reaches your camera lens with this set of Mavic 2 Zoom ND filters. Designed to capture the images you need in most light conditions, this pack of neutral density filters from DJI includes ND4, ND8, ND16, and ND32 filters allowing 1/4, 1/8, 1/16, and 1/32 of incoming light neutrally without changing the color of the light.

The Mavic 2 Shoulder Bag is designed to carry everything you need for a full day of flying. This is the same bag that is included with the Mavic 2 Fly More Kit and Mavic 2 Enterprise Fly More Kit. It holds the Mavic 2 aircraft, a standard remote controller, up to three flight batteries, extra props, and miscellaneous cables.

The DJI Mavic Mini Two-Way Charging Hub intelligently charges up to three Mavic Mini batteries in sequence. The Intelligent Flight Battery with the highest power level will be fully charged first. Other batteries will be charged in the same manner, according to their power levels. Charge three MB2-2400mAh-7.2V packs in 4.5 hours to charge all three packs. Charging three MB3-1100mAh-7.6V batteries, all three will charge in up to 2.5 hours.

Turn your Mavic Mini into an aesthetic display while charging with this Mavic Mini charging base from DJI. An illuminated halo outlines the charging base, transforming the included transparent cover into an art case for your Mavic Mini drone.

Explicitly designed to power the DJI Matrice 200 Series, the TB50 Intelligent Flight Battery is a 12-cell (12S) LiPo battery with a maximum capacity of 5935 mAh and a maximum voltage of 52.8 V. With its self-heating ability, the TB60 can perform even in extreme cold. The TB60 battery can only be charged using the DJI BS60 Battery Charging Station.

The Propeller Mounting Plate for Matrice 200 Series Drones from DJI is designed to connect the propeller with the motor. This is for a set of four replacement mounting plates for your aircraft. You can easily add one or more mounting plates to your equipment, which will give you the ability to make onsite repairs if needed.

The DJI Matrice 210 V1 Dual Downward Gimbal Connector allows you to physically mount two camera gimbals to the bottom of your Matrice 210 V1 or Matrice 210 RTK V1. This gimbal mount is only compatible with the Matrice 200 Series V1.

With DJI's Upward Gimbal Connector, you can now mount a single camera gimbal (sold separately) to the top of your matrice 200 Series Drones.

Add additional functionality with this single Antenna Mounting Bracket for Matrice 200 from DJI and an (optional) GPS module or D-RTK antenna. When mounting a D-RTK antenna, this mount will also accommodate the folding and unfolding of the antenna. When folded, the bracket helps to keep the D-RTK antenna under the drone's body.

This replacement Weatherproofing Top Shell Plug from DJI is compatible with the Matrice 210 v2 and Matrice 210 RTK V2.

The Zenmuse X5 from DJI was the world's first Micro Four Thirds drone camera. This is the Zenmuse X5 Body Only, meaning it does not come with a lens, allowing you to choose any existing Micro Four Thirds lens, or purchase one separately that's perfect for your mission. The Zenmuse X5 is only compatible with the DJI Inspire 1 V2 or Matrice 600 Pro (gimbal mounting bracket is required).

Designed to stabilize your camera on the gimbal, this Balancing Ring from DJI is compatible with the Zenmuse X5S Gimbal and Camera and the
Panasonic 15mm f/1.7 ASPH Prime Lens.

Designed to stabilize your camera on the gimbal, this Balancing Ring from DJI is compatible with the Zenmuse X5 Gimbal and Camera and the
Olympus 17mm f/1.8 Lens.

The Zenmuse X5S was designed for high-end professional aerial imaging by DJI. The Zenmuse X5S features an updated Micro 4/3rds sensor, a dynamic range of 12.8 stops with a much-improved signal-to-noise ratio, and color sensitivity which allows the Zenmuse X5S to capture high-quality, high-resolution images when combined with the extraordinary CineCore 2.0 image processing system. The new CineCore 2.0 image processing system on the Inspire 2 makes the Zenmuse X5S capable of capturing 5.2K30 CinemaDNG video and Apple ProRes video, as well as 4K60 using H.264 and 4K30 in H.265 (both at 100 Mb/s). Continuous DNG burst shooting at 20 fps with 20.8MP images is also supported.

Designed to stabilize your camera on the gimbal, this Balancing Ring from DJI is compatible with the Zenmuse X5 Gimbal and Camera and the
Panasonic 15mm f/1.7 ASPH Prime Lens.

Designed to stabilize your camera on the gimbal, this Balancing Ring from DJI is compatible with the Zenmuse X5S Gimbal and Camera and the
Panasonic 14-42mm f/3.5-5.6 ASPH Zoom Lens.

Designed to stabilize your camera on the gimbal, this Balancing Ring from DJI is compatible with the Zenmuse X5S Gimbal and Camera and the
Olympus 45mm f/1.8 ASPH Prime Lens.