Tello EDU is an impressive and programmable drone perfect for education. You can easily learn programming languages such as Scratch, Python, and Swift. With an upgraded SDK 2.0, Tello EDU comes with more advanced commands and increased data interfaces. Complete with DJI’s flight control technology, Tello EDU also supports Electronic Image Stabilization. Write code to command multiple Tello EDUs to fly in a swarm, and develop amazing AI functions. Programming has never been this fun thanks to the Tello EDU!

The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the Inspire 2 Battery Charger. Four Intelligent Flight Batteries can be placed in the Charging Hub at once, and a maximum of two batteries will be charged at a time. The battery pair with more stored power will be charged first. The Charging Hub will intelligently charge batteries in sequence according to battery power levels from high to low.

This External GPS Kit for the DJI Matrice 200 Series V2 provides you with an external GPS antenna which is required when top-mounting a gimbal on the M210 V2 or M210 RTK V2. Some third-party sensors and accessories also utilize the External GPS Kit and the manufacturer of your sensor or accessory should specify when to use it. The GPS antenna is built onto a landing gear mounting bracket that can replace either the left or right-hand mounting bracket already on your aircraft.

Turn your Inspire 2 into a handheld camera with this pair of Handle Grips from DJI so you can easily capture ground shots. You can also use these handle grips to catch your landing aircraft. The handle grips are easy to mount on the Inspire 2 using the included locks and screws.

The Mavic 2 Shoulder Bag is designed to carry everything you need for a full day of flying. This is the same bag that is included with the Mavic 2 Fly More Kit and Mavic 2 Enterprise Fly More Kit. It holds the Mavic 2 aircraft, a standard remote controller, up to three flight batteries, extra props, and miscellaneous cables.

If there's one brand that resonates with drone pilots, it's Hoodman. This Hoodman drone launch pad is their 5-foot diameter landing pad designed to keep your small drone safe during takeoff and landing. This is the recommended landing pad for drones such as the DJI Matrice 300 RTK.

GPC Mini 2 w/Smart Controller Case is the most compact and secure way to travel with and store your Mini 2 and DJI Smart Controller. This case holds the Mini 2, DJI Smart Controller, up to four flight batteries (with one in the drone), USB battery charger, and props, cables, miscellaneous accessories.

The Ryze Tech Tello Quadcopter Boost Combo lets you carry out longer programmed flights, or just buzz around for longer, as it comes packaged with three batteries, instead of one, and a 3-battery charging hub. Each battery will power up to 13 minutes of flight on a full charge. The Tello drone's tiny form factor and smart Intel processor enable it to perform exciting aerial tricks on a whim, all through smartphone control. Download the free Tello app and get going, with intuitive controls for entertaining flying maneuvers and the ability to code your flight plans using Scratch.

DJI Care Refresh 1-Year Plans allow for two replacements in one year, including one chance to use Flyaway Coverage. When it comes to accidents like water damage, collisions, or missing aircraft, you can have your product replaced for a small additional cost. For the DJI Mavic 3 Classic, the first DJI Care Refresh replacement fee is $129, and the second replacement fee is $159. If you use the replacement available for Flyaway Coverage, the replacement fee will be $519.

The DJI Mavic 3 Enterprise Speaker transmits sound over long distances to make rescue and other emergency missions more efficient. The DJI M3E Speaker can save several audio recordings and supports auto loop playback.

This Intelligent Flight Battery for the DJI FPV drone is a 6-cell (6S) Lithium-polymer (LiPo) battery providing up to 20 minutes of flight time.

The Phantom 4 Intelligent Flight Battery is a four-cell (4S) lithium-ion polymer (LiPo) battery with a maximum capacity of 5870 mAh that is compatible with all Phantom 4 models, including the Phantom 4 Pro V2, Phantom 4 RTK, and Phantom 4 Multispectral.

The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 quadcopter, insert it into the CINESSD Station, then connect the station to a computer via the included USB 3.0 cable. Once connected, you'll be able to export the data from CINESSD onto your computer.

The Mavic 2 Enterprise Intelligent Flight Battery is a 4-cell (4S) lithium-ion polymer (LiPo) battery with a maximum capacity of 3850 mAh. Built-in self-heating technology improves flight times and overall performance in extremely cold environments (14 °F / -10 °C).

The DJI FPV Remote Controller 2 adopts an ergonomic design with Hall effect control sticks, which enables a better operating experience. This remote is compatible with the DJI FPV and DJI Avata drones, and the DJI Goggles 2 and DJI FPV Goggles 2.

The GPC Mavic 3 w/RC Pro Case holds all of your Mavic 3 Fly More Combo contents, the RC Pro, and more. Designed to hold the DJI RC Pro remote controller, four total flight batteries, a charging hub and charger, a tablet up to 11", tablet mount, and more. There are even cavities for the UVT ProCare Lens Cleaning Pen and GPC microSD Card Holder.

The GPC Mavic 3 Case holds all of your Mavic 3 Fly More Combo contents and more. Designed to hold the standard DJI RC-N1 remote controller, four total flight batteries, a charging hub and charger, a tablet up to 11", tablet mount, and more. There are even cavities for the UVT ProCare Lens Cleaning Pen and GPC microSD Card Holder.

Whether you need extra storage or you're trying to keep the weight of your M300 case down, the GPC DJI Matrice 300 Battery Case is your answer. The weather-resistant, drop-resistant hard case comes with custom cut foam to house a total of six (6) DJI M300 TB60 batteries.

When you need on-the-go storage for your Phantom 4 Batteries the DJI Phantom 4 Battery Case by Go Professional Cases (GPC) is the premium solution. The weather-resistant, drop-resistant hard case comes with custom cut foam to house a total of six (8) DJI Phantom 4 batteries.

This is the battery that powers the Mavic 3 drone from DJI. This is a 4-cell (4S) LiPo battery with a maximum capacity of 5000 mAh or 77 Wh. This battery will provide up to 46 minutes of flight time with your DJI Mavic 3.

The DJI Matrice 300 Upward Gimbal Connector adds the ability to mount an upward-facing payload to your DJI M300. This gimbal connector can be attached in addition to the factory single downward gimbal connector, or the available dual downward gimbal connector.

You are not able to attach this gimbal connector if you have the available CSM Radar attached.