The Propeller Mounting Plate for Matrice 200 Series Drones from DJI is designed to connect the propeller with the motor. This is for a set of four replacement mounting plates for your aircraft. You can easily add one or more mounting plates to your equipment, which will give you the ability to make onsite repairs if needed.

The DJI Matrice 210 V1 Dual Downward Gimbal Connector allows you to physically mount two camera gimbals to the bottom of your Matrice 210 V1 or Matrice 210 RTK V1. This gimbal mount is only compatible with the Matrice 200 Series V1.

With DJI's Upward Gimbal Connector, you can now mount a single camera gimbal (sold separately) to the top of your matrice 200 Series Drones.

Add additional functionality with this single Antenna Mounting Bracket for Matrice 200 from DJI and an (optional) GPS module or D-RTK antenna. When mounting a D-RTK antenna, this mount will also accommodate the folding and unfolding of the antenna. When folded, the bracket helps to keep the D-RTK antenna under the drone's body.

These 2195 high-altitude folding low-noise propellers enable your DJI Matrice 600 Series to safely and efficiently operate at altitudes higher than 2500 meters MSL. Sold in pairs with one clockwise (CW) and one counterclockwise (CCW)

Protect your Matrice 600 propellers while on the go with this Arm Sleeve by DJI. The Arm Sleeve helps shield the propellers of your Matrice 600 by securing them to the drone's motor arm.

The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 quadcopter, insert it into the CINESSD Station, then connect the station to a computer via the included USB 3.0 cable. Once connected, you'll be able to export the data from CINESSD onto your computer.

The DJI Inspire 2 Remote Controller is purposed to be used with the DJI Inspire 2 drone. With integrated DJI Lightbridge technology the remote controller has an effective transmission distance of up to 4.6 miles and is capable of delivering both 1080p/720p video as well as FPV to pilot and camera operators. Switch between 2.4GHz and 5.8GHz** control frequencies to cut through noise for greater signal stability. Dual remote control support with HDMI output.

DJI Inspire 2 1550T Quick-Release Propellers have been designed by DJI to enable efficient, safe, and reliable flight with the Inspire 2. These propellers are very easy to install and remove thanks to their quick-release design and color-coding to indicate the proper rotation for each motor. These Inspire 2 DJI propellers are sold in pairs, each coming with one clockwise and one counterclockwise propeller.

The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the Inspire 2 Battery Charger. Four Intelligent Flight Batteries can be placed in the Charging Hub at once, and a maximum of two batteries will be charged at a time. The battery pair with more stored power will be charged first. The Charging Hub will intelligently charge batteries in sequence according to battery power levels from high to low.

Use this pack of DJI Quick Release Propeller Mounting Plates to install the Quick Release Propellers onto your Inspire 2 quadcopter. Included are 4 mounts with installation hardware. These components are designed to minimize wear between the propeller and the propeller mount, extending the life of your propeller.

DJI Inspire 2 1560T Quick-Release High-Altitude Propellers have been designed by DJI to improve performance with your Inspire 2 at altitudes between 8,200 to 16,400 ft. Designed with a larger propeller pitch increasing the copter's propulsion force at higher altitudes. These propellers are very easy to install and remove thanks to their quick-release design and color-coding to indicate the proper rotation for each motor. These Inspire 2 DJI props are sold in pairs, each coming with one clockwise and one counterclockwise propeller.

With this Module, provide your Inspire 2 Remote Controller with GPS accurate positioning coordinates. This GPS module enables the use of dynamic home points and offers your remote controller positioning information during ActiveTrack.

The 180W Power Adapter AC Cable from DJI is designed for use with the factory battery charger that originally came with your Inspire 2 aircraft.

The DJI Inspire 2 Focus Handwheel 2 Remote Controller Stand enables you to mount the Focus Handwheel to a remote controller. This allows a single operator to both pilot the Inspire 2 quadcopter, and more easily adjust the Zenmuse X5S camera's aperture and focus.

This cable is used to connect the Inspire 2 Battery Charging Hub to the Inspire 1 Battery Charger (compatible with 180 W and 100 W Battery Chargers) for Inspire 2 battery charging.

Turn your Inspire 2 into a handheld camera with this pair of Handle Grips from DJI so you can easily capture ground shots. You can also use these handle grips to catch your landing aircraft. The handle grips are easy to mount on the Inspire 2 using the included locks and screws.

Inspire 2 Propeller Guards are crafted with 12k pure carbon fiber mixed with high-strength epoxy resin. They're not only light but also 50 times more durable and 100 times more rigid than standard engineering plastics, making them exceptionally hard to break or deform. Small and easy to mount and detach, these guards protect the propellers from colliding with people and objects, providing an additional layer of flight safety. Consider when flying at particularly high speeds, the propeller guards may only have a limited impact on reducing damage from collisions. Always fly with caution and mind your surroundings.

The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 quadcopter, insert it into the CINESSD Station, then connect the station to a computer via the built-in Thunderbolt 3 cable. Once connected, you'll be able to export the data from CINESSD onto your computer.

These OEM replacement gimbal rubber dampers are designed to replace the factory dampeners that are installed on your DJI gimbal bracket. These dampers are compatible with the Inspire 2 and Matrice 200 Series.