The DJI Matrice 210 V1 Dual Downward Gimbal Connector allows you to physically mount two camera gimbals to the bottom of your Matrice 210 V1 or Matrice 210 RTK V1. This gimbal mount is only compatible with the Matrice 200 Series V1.

With DJI's Upward Gimbal Connector, you can now mount a single camera gimbal (sold separately) to the top of your matrice 200 Series Drones.

This External GPS Kit for the DJI Matrice 200 Series V2 provides you with an external GPS antenna which is required when top-mounting a gimbal on the M210 V2 or M210 RTK V2. Some third-party sensors and accessories also utilize the External GPS Kit and the manufacturer of your sensor or accessory should specify when to use it. The GPS antenna is built onto a landing gear mounting bracket that can replace either the left or right-hand mounting bracket already on your aircraft.

PRCS stands for Portable Rapid Charging Station and the PRCS Elite for the DJI Inspire 2 TB50 and Matrice 200 Series TB50-M200 and TB55 battery is by far the best solution for rapid field charging. With its proprietary intelligent charging algorithms, the Colorado Drone Chargers PRCS Elite safely and efficiently charges up to four TB50 or TB55 batteries along with one WB37 battery using your existing WB37 Battery Charging Hub. Fully charge your four TB50s or TB55s in about 90 minutes with the CDC PRCS Elite.

Add additional functionality with this single Antenna Mounting Bracket for Matrice 200 from DJI and an (optional) GPS module or D-RTK antenna. When mounting a D-RTK antenna, this mount will also accommodate the folding and unfolding of the antenna. When folded, the bracket helps to keep the D-RTK antenna under the drone's body.

DJI Matrice 200 1760S Quick-Release Propellers have been designed by DJI to enable efficient, safe, and reliable flight with the DJI Matrice 200 Series drones. Easy to install and remove thanks to their quick-release design and color-coding to indicate the proper rotation for each motor, these Matrice 200 Series props are sold in pairs, each coming with one clockwise and one counterclockwise propeller.

The Propeller Mounting Plate for Matrice 200 Series Drones from DJI is designed to connect the propeller with the motor. This is for a set of four replacement mounting plates for your aircraft. You can easily add one or more mounting plates to your equipment, which will give you the ability to make onsite repairs if needed.

Each blade of these DJI Inspire 3 propellers has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise. Sold in pairs.

These high-altitude DJI Inspire 3 propellers are made especially for use at or above 3000 meters. Using these propellers lower than 3000 meters may result in shorter flight times and undesired flight characteristics. Sold in pairs.

At the peak of aerial cinematography, DJI Inspire 3 offers unprecedented workflow efficiency, camera language, and creative freedom. This all-in-one 8K camera drone empowers professional-level filmmakers to fully maximize the potential of any shot and master the unseen.

The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 quadcopter, insert it into the CINESSD Station, then connect the station to a computer via the included USB 3.0 cable. Once connected, you'll be able to export the data from CINESSD onto your computer.

The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 quadcopter, insert it into the CINESSD Station, then connect the station to a computer via the built-in Thunderbolt 3 cable. Once connected, you'll be able to export the data from CINESSD onto your computer.

The DJI Inspire 2 Remote Controller is purposed to be used with the DJI Inspire 2 drone. With integrated DJI Lightbridge technology the remote controller has an effective transmission distance of up to 4.6 miles and is capable of delivering both 1080p/720p video as well as FPV to pilot and camera operators. Switch between 2.4GHz and 5.8GHz** control frequencies to cut through noise for greater signal stability. Dual remote control support with HDMI output.

Inspire 2 Propeller Guards are crafted with 12k pure carbon fiber mixed with high-strength epoxy resin. They're not only light but also 50 times more durable and 100 times more rigid than standard engineering plastics, making them exceptionally hard to break or deform. Small and easy to mount and detach, these guards protect the propellers from colliding with people and objects, providing an additional layer of flight safety. Consider when flying at particularly high speeds, the propeller guards may only have a limited impact on reducing damage from collisions. Always fly with caution and mind your surroundings.

The Mobile Device Holder Adapter is used to connect the old version of the Inspire 2 remote controller mobile device holder to the new version of the Inspire 2 remote controller mounting bracket.

Turn your Inspire 2 into a handheld camera with this pair of Handle Grips from DJI so you can easily capture ground shots. You can also use these handle grips to catch your landing aircraft. The handle grips are easy to mount on the Inspire 2 using the included locks and screws.

These OEM replacement gimbal rubber dampers are designed to replace the factory dampeners that are installed on your DJI gimbal bracket. These dampers are compatible with the Inspire 2 and Matrice 200 Series.

Prevent an accidental loss of your Inspire 2's Zenmuse X7 gimbal with this Gimbal Protection Kit from DJI. This Kit consists of a steel plate and braided steel wire that secures the drone's damping plate to the drone.

With this Module, provide your Inspire 2 Remote Controller with GPS accurate positioning coordinates. This GPS module enables the use of dynamic home points and offers your remote controller positioning information during ActiveTrack.

The DJI Inspire 2 Focus Handwheel 2 Remote Controller Stand enables you to mount the Focus Handwheel to a remote controller. This allows a single operator to both pilot the Inspire 2 quadcopter, and more easily adjust the Zenmuse X5S camera's aperture and focus.

The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the Inspire 2 Battery Charger. Four Intelligent Flight Batteries can be placed in the Charging Hub at once, and a maximum of two batteries will be charged at a time. The battery pair with more stored power will be charged first. The Charging Hub will intelligently charge batteries in sequence according to battery power levels from high to low.