GPC's Mavic 3 Battery Case holds up to eight flight batteries, a battery charger, and the Mavic 3 Battery Charging Hub.

Offering powerful performance, DJI RC Pro is designed for professional-level aerial photography. Thanks to the next-generation processor and increased storage capacity, DJI RC Pro works more stably and smoothly. It comes with the powerful O3+ video transmission technology. It also adopts the same control sticks as DJI FPV, offering a precise, ultra-smooth control experience. The DJI RC Pro is not compatible with any DJI Enterprise drones.

The DJI Mavic 3 Battery Charging Hub intelligently charges up to three batteries for the Mavic 3. The Intelligent Flight Battery with the highest power level will be fully charged first. Other batteries will be charged in the same manner, according to their power levels displayed on the battery’s LED indicators.

This pair of low-noise, quick-release propellers are direct factory replacements of the propellers that come with the DJI Mavic 3 and DJI Mavic 3 Cine drone. These Mavic 3 props are sold in pairs, each coming with one clockwise (CW) and one counterclockwise (CCW) propeller.

This is the battery that powers the Mavic 3 drone from DJI. This is a 4-cell (4S) LiPo battery with a maximum capacity of 5000 mAh or 77 Wh. This battery will provide up to 46 minutes of flight time with your DJI Mavic 3.

DJI Care Refresh 1-Year Plans allow for two replacements in one year, including one chance to use Flyaway Coverage. When it comes to accidents like water damage, collisions, or missing aircraft, you can have your product replaced for a small additional cost. For the DJI Mavic 3 Cine, the first Care Refresh replacement fee is $239, and the second replacement fee is $299. If you use the one available replacement under Flyaway Coverage, the replacement fee will be $1,189.

DJI Care Refresh 1-Year Plans allow for two replacements in one year, including one chance to use Flyaway Coverage. When it comes to accidents like water damage, collisions, or missing aircraft, you can have your product replaced for a small additional cost. For the DJI Mavic 3, the first Care Refresh replacement fee is $159, and the second replacement fee is $199. If you use the one available replacement under Flyaway Coverage, the replacement fee will be $739.

A leap forward in professional-quality aerial imaging, the Mavic 3 from DJI is their flagship drone that offers a dual-camera setup in a 3-axis gimbal. There's the 20MP wide-angle camera with 4/3" CMOS from legendary camera maker Hasselblad and a 12MP telephoto with 1/2" CMOS, 4K video, and 28x hybrid zoom. You can utilize the telephoto in Explore Mode to scout locations, but its primary function is to be used in conjunction with the wide-angle Hasselblad, transitioning between the two for truly dynamic, cinematic results.

The GPC Mavic 3 w/RC Pro Case holds all of your Mavic 3 Fly More Combo contents, the RC Pro, and more. Designed to hold the DJI RC Pro remote controller, four total flight batteries, a charging hub and charger, a tablet up to 11", tablet mount, and more. There are even cavities for the UVT ProCare Lens Cleaning Pen and GPC microSD Card Holder.

The GPC Mavic 3 Case holds all of your Mavic 3 Fly More Combo contents and more. Designed to hold the standard DJI RC-N1 remote controller, four total flight batteries, a charging hub and charger, a tablet up to 11", tablet mount, and more. There are even cavities for the UVT ProCare Lens Cleaning Pen and GPC microSD Card Holder.

This 180W Power Adapter from DJI is the same type that shipped with your Inspire 2 from DJI and is a slim, low-profile power adapter that charges your Inspire 2 remote controller and flight battery using AC power. It takes approximately 1.5 hours to fully charge an Inspire 2 Intelligent Flight Battery or 2.5 hours to charge an Inspire 2 remote controller. When charging both devices together, charging may take longer than 2.5 hours. A compatible C5 (Mickey Mouse) AC power cable is required and sold separately.

On the road or on the set, professionals can’t get caught with a lack of power. That’s why GPC created the optimal Inspire 2 spare battery case solution. GPC has packed 8 flights into this case with 2 chargers and hubs to keep you up and running. One of the toughest challenges with the Inspire 2 can be airline travel and baggage issues. This case allows you to check your Inspire 2 and then carry-on the batteries in this perfect, manageable size.

Prevent an accidental loss of your Inspire 2's Zenmuse X7 gimbal with this Gimbal Protection Kit from DJI. This Kit consists of a steel plate and braided steel wire that secures the drone's damping plate to the drone.

The Mobile Device Holder Adapter is used to connect the old version of the Inspire 2 remote controller mobile device holder to the new version of the Inspire 2 remote controller mounting bracket.

These OEM replacement gimbal rubber dampers are designed to replace the factory dampeners that are installed on your DJI gimbal bracket. These dampers are compatible with the Inspire 2 and Matrice 200 Series.

The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 quadcopter, insert it into the CINESSD Station, then connect the station to a computer via the built-in Thunderbolt 3 cable. Once connected, you'll be able to export the data from CINESSD onto your computer.

Inspire 2 Propeller Guards are crafted with 12k pure carbon fiber mixed with high-strength epoxy resin. They're not only light but also 50 times more durable and 100 times more rigid than standard engineering plastics, making them exceptionally hard to break or deform. Small and easy to mount and detach, these guards protect the propellers from colliding with people and objects, providing an additional layer of flight safety. Consider when flying at particularly high speeds, the propeller guards may only have a limited impact on reducing damage from collisions. Always fly with caution and mind your surroundings.

Turn your Inspire 2 into a handheld camera with this pair of Handle Grips from DJI so you can easily capture ground shots. You can also use these handle grips to catch your landing aircraft. The handle grips are easy to mount on the Inspire 2 using the included locks and screws.

This cable is used to connect the Inspire 2 Battery Charging Hub to the Inspire 1 Battery Charger (compatible with 180 W and 100 W Battery Chargers) for Inspire 2 battery charging.

The DJI Inspire 2 Focus Handwheel 2 Remote Controller Stand enables you to mount the Focus Handwheel to a remote controller. This allows a single operator to both pilot the Inspire 2 quadcopter, and more easily adjust the Zenmuse X5S camera's aperture and focus.

The 180W Power Adapter AC Cable from DJI is designed for use with the factory battery charger that originally came with your Inspire 2 aircraft.